SATO CL408E Parallel Thermo Label Drucker REWINDER 203dpi 4.1" 104mm - 17702.4 M
[+] Click for Bigger Image

SATO CL408E Parallel Thermo Label Drucker REWINDER 203dpi 4.1" 104mm - 17702.4 M (€285.00)

Located in Baarle-Hertog (2387)


Go To Store!




SATO CL408E Parallel Thermo Label Drucker REWINDER 203dpi 4.1" 104mm - 17702.4 M

Dear customer,

When there might be a difference between the automatic generated specifications by the Ebay system, and the hand written/typed description, then please be aware that the only correct description is what's written by our selves here in the description.
Specifications above might be slightly different.
Thanks for your understanding.

17702.4 meters PRINTED

 

TESTED & PRINTING OK

 

 PARALLEL + MINI PARALLEL INTERFACE

 

See photos for actual item!

Price is for 1 item.

SPECIFICATIONS OF THE CL408e:

Printing Method: 
Thermal Transfer, Direct Thermal 

Printing Speed: 
Up to 6" (150 mm) per second 

Print Resolution: 
203 dpi (8 dots/mm) 

Print Area: 
4.1" (104 mm) W x 14" (356 mm) L, 49.2" (1249 mm) L with 2Mb PCMCIA memory card 

Barcode Symbologies: 
UPC-A/E, EAN, Code 39, Code 93, Code 128, I 2 of 5, Industrial 2 of 5, Matrix 2 of 5, Codabar, MSI, Bookland, POSTNET, UCC/EAN 128, PDF417, Maxicode, Data Matrix 

Barcode Ratio: 
2:1, 3:1, 5:2 or individually adjustable bar widths 

Barcode Height: 
Programmable 

Human Readable Fonts: 
12 proportional and mono-spaced fonts including OCR-A and OCR-B representations and an outline font. American and European characters, uppercase and lower case with descenders (code table 850). 

Flexibility: 
Rotation of barcodes and text in four 90 steps; character expansion horizontally and vertically in 12 steps; RAM storage for special characters, dot-addressable graphics; sequential numbering. Form overlay for high speed editing of complex formats 

Graphic Support: 
SATO Hex/binary and PCX formats 

Media: 
Roll or fan-fold die cut labels, plain paper face stock, SATO standard or equivalent. Tag Stock, SATO standard or equivalent with punched feed slot for "see through" sensing or sense mark for reflective sensing. 

Maximum caliper: 
0.01" (0.25 mm) 

Maximum roll diameter: 
8.6" (218 mm) 

Roll core diameter: 
1.5" (38 mm) or 3" (76 mm) 

Sensing: 
Adjustable position photo sensor for die cut labels and tags. Reflective sensor for use with preprinted sensing marks. Automatic, programmable setting of top of form. 

Media Size: 
Minimum: 0.87" (22 mm) W x 0.23" (6 mm) L 
Maximum: 5.15" (131 mm) W x 14" (56 mm )L. Up to 49.2" L (1249 mm) with additional PCMCIA memory. 

Ribbon:
 Up to 4.4" (111 mm) W x 1475' (450 m ) L, wound Face-in 

Interfaces: Centronics Parallel


Comes as shown on picture, if something is not on the picture it's not included unless stated otherwise.
       
 







Go To Store