When there might be a difference between the automatic generated specifications by the Ebay system, and the hand written/typed description, then please be aware that the only correct description is what's written by our selves here in the description.
Specifications above might be slightly different.
Thanks for your understanding.
Total printed: 5802,2 Meters
Including internal rewinder, see photo
Direct Thermal or Thermal Transfer printing
Tested and working 100% OK
SPECIFICATIONS OF THE CL408e:
Printing Method: Thermal Transfer, Direct Thermal
Printing Speed: Up to 6" (150 mm) per second
Print Resolution: 203 dpi (8 dots/mm)
Print Area: 4.1" (104 mm) W x 14" (356 mm) L, 49.2" (1249 mm) L with 2Mb PCMCIA memory card
Barcode Symbologies: UPC-A/E, EAN, Code 39, Code 93, Code 128, I 2 of 5, Industrial 2 of 5, Matrix 2 of 5, Codabar, MSI, Bookland, POSTNET, UCC/EAN 128, PDF417, Maxicode, Data Matrix
Barcode Ratio: 2:1, 3:1, 5:2 or individually adjustable bar widths
Barcode Height: Programmable
Human Readable Fonts: 12 proportional and mono-spaced fonts including OCR-A and OCR-B representations and an outline font. American and European characters, uppercase and lower case with descenders (code table 850).
Flexibility: Rotation of barcodes and text in four 90 steps; character expansion horizontally and vertically in 12 steps; RAM storage for special characters, dot-addressable graphics; sequential numbering. Form overlay for high speed editing of complex formats
Graphic Support: SATO Hex/binary and PCX formats
Media: Roll or fan-fold die cut labels, plain paper face stock, SATO standard or equivalent. Tag Stock, SATO standard or equivalent with punched feed slot for "see through" sensing or sense mark for reflective sensing.
Maximum caliper: 0.01" (0.25 mm)
Maximum roll diameter: 8.6" (218 mm)
Roll core diameter: 1.5" (38 mm) or 3" (76 mm)
Sensing: Adjustable position photo sensor for die cut labels and tags. Reflective sensor for use with preprinted sensing marks. Automatic, programmable setting of top of form.
Minimum: 0.87" (22 mm) W x 0.23" (6 mm) L
Maximum: 5.15" (131 mm) W x 14" (56 mm )L. Up to 49.2" L (1249 mm) with additional PCMCIA memory.
Ribbon: Up to 4.4" (111 mm) W x 1475' (450 m ) L, wound Face-in
Interfaces: Centronics Parallel
If something is not on the picture it's not included unless stated otherwise.